Hi Circuit Dojo team,
I purchased an nRF9151 Feather (PASSY-NRF9151-FEATHER) through Digikey. (followed URL from Your product page (https://www.circuitdojo.com/products/nrf9151-feather))
Your product page (https://www.circuitdojo.com/products/nrf9151-feather) advertises the module as nRF9151 LACA A1A, and the Digikey listing I ordered from (https://www.digikey.com/en/products/detail/circuit-dojo/PASSY-NRF9151-FEATHER/26580618) gives no indication otherwise.
However, the module I received is marked nRF9151 LACA A0.
This is a blocker for my application, which requires NTN (non-terrestrial / satellite) operation. Per Nordic’s own NTN documentation, the NTN bands are supported only on nRF9151 LACA A1A silicon — A0 parts do not support NTN and are not slated to be updated. I’ve confirmed this on the hardware: the board flashes and reports the NTN modem firmware correctly, but the modem fails to bring up the NTN radio-access technology (repeated RAT setup failed at boot), consistent with the A0 limitation.
Could you please:
Confirm which silicon revision is currently shipping against this SKU (PASSY-NRF9151-FEATHER)?
Advise how to obtain the A1A version specifically — and how I can verify the revision on receipt?
Let me know the exchange/replacement options for the A0 unit I received, given the listing specifies A1A?