I built the zephyr/samples/drivers/spi_flash without issues but when I tried
west build -b nrf9160dk_nrf9160
the build fails unknown flash
I compared the circuitdojo_feather_nrf9160_common.dts and nrf9160dk_nrf9160_common.dts
and found the nrf9160dk_nrf9160 was/is missing:
w25q16jv: w25q16jv@0 {
compatible = “jedec,spi-nor”;
label = “W25Q16JV”;
reg = <0>;
spi-max-frequency = <40000000>;
wp-gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
hold-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
size = <0×1000000>;
has-dpd;
t-enter-dpd = <4000>;
t-exit-dpd = <25000>;
jedec-id = [ef 40 15];
}; (from circuitdojo)
I built one for the DK:
mx25r6435f: mx25r6435f@0 {
compatible = “jedec,spi-nor”;
label = “mx25r6435f”;
reg = <0>;
spi-max-frequency = <40000000>;
size = <0×4000000>;
has-dpd;
t-enter-dpd = <10000>;
t-exit-dpd = <35000>;
jedec-id = [c2 28 17];
}
Where did you find the information to build this?
Any idea why Nordic left it out of the nrf9160 but have it in the nrf5340:
mx25r64: mx25r6435f@0 {
compatible = “nordic,qspi-nor”;
reg = <0>;
/* MX24R64 supports only pp and pp4io /
writeoc = “pp4io”;
/ MX24R64 supports all readoc options */
readoc = “read4io”;
sck-frequency = <8000000>;
label = “MX25R64”;
jedec-id = [c2 28 17];
sfdp-bfp = [
e5 20 f1 ff ff ff ff 03 44 eb 08 6b 08 3b 04 bb
ee ff ff ff ff ff 00 ff ff ff 00 ff 0c 20 0f 52
10 d8 00 ff 23 72 f5 00 82 ed 04 cc 44 83 68 44
30 b0 30 b0 f7 c4 d5 5c 00 be 29 ff f0 d0 ff ff
];
size = <67108864>;
has-dpd;
t-enter-dpd = <10000>;
t-exit-dpd = <35000>;
};
Not a good way to kill a Sunday… The good part was the feather code building without issues!
