Error whilst compiling Blinky

mikcatta · 2020-12-12T20:30:32+00:00

I have my board and thought I would give it a whurl. However, I can’t compile the Blinky app. Output from the west build is below. `– west build: making bui...

jaredwolff

mikcatta what version of cmake are you running?

What version of python?

mikcatta

@jaredwolff

C:\Users\mike_>cmake -version
cmake version 3.19.1

C:\Users\mike_>python –version
Python 3.9.0

I have also installed on my Ubuntu VM and I get exactly the same error, so maybe there is a step missing in the instructions?

with -p included in the options

-- Configuring incomplete, errors occurred!
See also "/home/mike/nfed/nrf9160-feather/samples/blinky/build/CMakeFiles/CMakeOutput.log".
See also "/home/mike/nfed/nrf9160-feather/samples/blinky/build/CMakeFiles/CMakeError.log".
FATAL ERROR: command exited with status 1: /usr/bin/cmake -B/home/mike/nfed/nrf9160-feather/samples/blinky/build -S/home/mike/nfed/nrf9160-feather/samples/blinky -GNinja -DBOARD=circuitdojo_feather_nrf9160ns
--

without the -p

west build -b circuitdojo_feather_nrf9160ns
ninja: error: loading 'build.ninja': No such file or directory
FATAL ERROR: command exited with status 1: /usr/bin/cmake --build /home/mike/nfed/nrf9160-feather/samples/blinky/build

jaredwolff

mikcatta this is so funky. Do you mind uploading your CMakeOutput.log and CMakeError.log? Sorry for the issues with this. Just when you think the bugs are ironed out, more come out of the woodwork!

jaredwolff

mikcatta how did you init the NFED directory?

Did you do these steps?

cd C:\
mkdir nfed
cd nfed
west init -m https://github.com/circuitdojo/nrf9160-feather-examples-and-drivers --mr main

I did notice that my cmake is slightly older. How did you install it? Through choco?

mikcatta

yes did the “west init -m…..” command

Cmake I believe was installed from the installation routines (step 3) :- choco install cmake –installargs ‘ADD_CMAKE_TO_PATH=System’

jaredwolff

mikcatta hmm ok! I’m updating my setup here to see if I can reproduce the error.

mikcatta

CMakeError.log

Compiling the C compiler identification source file "CMakeCCompilerId.c" failed.
Compiler: C:/Program Files (x86)/GNU Tools Arm Embedded/9 2019-q4-major/bin/arm-none-eabi-gcc.exe 
Build flags: 
Id flags:  

The output was:
1
c:/program files (x86)/gnu tools arm embedded/9 2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld.exe: c:/program files (x86)/gnu tools arm embedded/9 2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/lib\libc.a(lib_a-exit.o): in function `exit':
exit.c:(.text.exit+0x2c): undefined reference to `_exit'
collect2.exe: error: ld returned 1 exit status


Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" failed.
Compiler: C:/Program Files (x86)/GNU Tools Arm Embedded/9 2019-q4-major/bin/arm-none-eabi-gcc.exe 
Build flags: 
Id flags:  

The output was:
1
c:/program files (x86)/gnu tools arm embedded/9 2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld.exe: c:/program files (x86)/gnu tools arm embedded/9 2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/lib\libc.a(lib_a-exit.o): in function `exit':
exit.c:(.text.exit+0x2c): undefined reference to `_exit'
collect2.exe: error: ld returned 1 exit status

jaredwolff

mikcatta awesome thanks for these. This helps!

mikcatta

CMakeOutput.log

The target system is: Generic - 2.3.0 - arm
The host system is: Windows - 10.0.18363 - AMD64
Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
Compiler: C:/Program Files (x86)/GNU Tools Arm Embedded/9 2019-q4-major/bin/arm-none-eabi-gcc.exe 
Build flags: 
Id flags: -c 

The output was:
0


Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "CMakeCCompilerId.o"

The C compiler identification is GNU, found in "C:/nfed/nrf9160-feather/samples/blinky/build/CMakeFiles/3.19.1/CompilerIdC/CMakeCCompilerId.o"

Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
Compiler: C:/Program Files (x86)/GNU Tools Arm Embedded/9 2019-q4-major/bin/arm-none-eabi-gcc.exe 
Build flags: 
Id flags: -c 

The output was:
0


Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "CMakeCXXCompilerId.o"

The CXX compiler identification is GNU, found in "C:/nfed/nrf9160-feather/samples/blinky/build/CMakeFiles/3.19.1/CompilerIdCXX/CMakeCXXCompilerId.o"

Checking whether the ASM compiler is GNU using "--version" matched "(GNU assembler)|(GCC)|(Free Software Foundation)":
arm-none-eabi-gcc.exe (GNU Tools for Arm Embedded Processors 9-2019-q4-major) 9.2.1 20191025 (release) [ARM/arm-9-branch revision 277599]
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

jaredwolff

@mikcatta can you delete your build folder and try again with west build -b circuitdojo_feather_nrf9160ns

mikcatta

@jaredwolff Presumably that is the build directory in the C:\nfed\nrf9160-feather\samples\blinky directory?

Deleted that directory and build using west build -b circuitdojo_feather_nrf9160ns and I still get the same error.

 Assertion failed: The toolchain is unable to build a dummy C file.  See
  CMakeError.log.
Call Stack (most recent call first):
  C:/nfed/zephyr/CMakeLists.txt:42 (assert)

jaredwolff

mikcatta @jaredwolff Presumably that is the build directory in the C:\nfed\nrf9160-feather\samples\blinky directory?

Yes, C:\nfed\nrf9160-feather\samples\blinky\build delete the whole build directory if that’s where you’re running west build -b circuitdojo_feather_nrf9160ns

mikcatta hmm so this error happens when the cmake cache is mucked up for some reason. The solution for Mac is this. working on a Windows solution..

jaredwolff

mikcatta try this:

Open up powershell.exe in Adminstrator mode and run:

choco uninstall cmake
choco install -y cmake --version 3.18.5

Then delete your build directory and try again.

mikcatta

Hi @jaredwolff

Tried that, and cmake didn’t seem to be added to the PATH, so had to add it manually and now it reports as:

C:\nfed\nrf9160-feather\samples\blinky>cmake -version
cmake version 3.18.5

But I still get the same error as before:-

CMake Error at C:/nfed/zephyr/cmake/extensions.cmake:1457 (message):
  Assertion failed: The toolchain is unable to build a dummy C file.  See
  CMakeError.log.
Call Stack (most recent call first):
  C:/nfed/zephyr/CMakeLists.txt:42 (assert)


-- Configuring incomplete, errors occurred!
See also "C:/nfed/nrf9160-feather/samples/blinky/build/CMakeFiles/CMakeOutput.log".
See also "C:/nfed/nrf9160-feather/samples/blinky/build/CMakeFiles/CMakeError.log".
FATAL ERROR: command exited with status 1: 'c:\program files\cmake\bin\cmake.EXE' '-BC:\nfed\nrf9160-feather\samples\blinky\build' '-SC:\nfed\nrf9160-feather\samples\blinky' -GNinja -DBOARD=circuitdojo_feather_nrf9160ns

jaredwolff

mikcatta where are you running these commands? powershell.exe? You don’t have any other cmake installations before using choco correct?

jaredwolff

I will add, what are you using to do your edits? I’m starting to see that my setup is not working in standalone powershell.exe but in the shell provided by VSCode. (as that’s how I did my testing)

jaredwolff

Can you try installing cmake with cmd.exe instead?

https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/getting_started/index.html#install-required-tools

It might be that there is some weirdness when using powershell.exe standalone. I have a build cooking away using standalone cmd.exe

mikcatta

@jaredwolff

I am running the commands from the Windows cmd prompt, is that OK?

I’ve done a search for cmake.exe and found the following:-

`C:>dir /s cmake.exe
Volume in drive C is OS
Volume Serial Number is 52E2-0FD2

Directory of C:\Program Files\CMake\bin

18/11/2020 07:21 8,964,752 cmake.exe
1 File(s) 8,964,752 bytes

Directory of C:\Users\mike_\ncs\v1.3.2\toolchain\opt\bin

14/11/2020 17:21 7,792,128 cmake.exe
1 File(s) 7,792,128 bytes

Directory of C:\Users\mike_\ncs\v1.4.0\toolchain\opt\bin

15/11/2020 11:57 7,792,128 cmake.exe`

But they don’t appear in the PATH…

C:\>echo %PATH% C:\Python39\Scripts\;C:\Python39\;C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\app\mike_\product\11.2.0\odac;C:\app\mike_\product\11.2.0\odac\bin;C:\app\mike_\product\11.2.0\client_64bit_odac\bin;C:\app\mike_\product\11.2.0\client_64bit_odac;C:\Program Files (x86)\Intel\iCLS Client\;C:\ProgramData\Oracle\Java\javapath;C:\Program Files\Intel\iCLS Client\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Apache\maven\bin;C:\Program Files\Java\jdk1.8.0_161\bin;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;c:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin;C:\instantclient_11_1;C:\WINDOWS\System32\OpenSSH\;C:\Program Files (x86)\NTP\bin;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\nodejs\;C:\ProgramData\chocolatey\bin;C:\Program Files\Git\cmd;C:\nRFConnectSDK\bin;c:\program files\cmake\bin;C:\Program Files (x86)\GNU Tools Arm Embedded\9 2019-q4-major\bin;C:\Users\mike_\AppData\Local\Microsoft\WindowsApps;C:\ProgramData\mike_\atom\bin;C:\Users\mike_\AppData\Local\Microsoft\WindowsApps;C:\Users\mike_\AppData\Roaming\npm;C:\Users\mike_\AppData\Local\Programs\Microsoft VS Code\bin

jaredwolff

@mikcatta I will add you may have to delete the build directory before trying in cmd.exe. Hopefully this fixes your issues. I’ve updated the instructions to hopefully address this issue when building in standalone terminal.

https://docs.jaredwolff.com/nrf9160-sdk-setup-windows.html#sdk-install

mikcatta

@jaredwolff Didn’t work for me, but it’s getting late so will try again tomorrow.

« Previous Page Next Page »